Fengjingye
Posts 641
|
How to clean glass after construction » StrongPedia Article Directory - Free article directory. Find free articles in our dofollow article directory Bishop Sankey Jersey , get free website content and submit your own articles for free.
One really easy thing is to look in the corners of the glass for the “toughened” symbol. In most instances, if you can feel this symbol, it means that that side of the glass can be scraped without leaving scratches as long as you scrape carefully. If you have been using your blade to strip barnacles off a boat Kendall Wright Jersey , of course the blade will be no good and probably scratch the glass. The same rules apply if you hit the melted dots that sparks from an angle grinder leave when they hit glass. Keep freshening up your blade and try not to use them on the bad side of toughened glass.
As far as I know Moen, GE James and Viridian all make glass with this raised symbol. It will quite often not be present on shower screens and pool fences etc but trust me, these will be toughened glass. To test which side can be scraped Delanie Walker Jersey , get a small 1 inch scraper with a new blade and test both sides when wet. The “bad side” will have a grainy feel and sandy sound whilst the side you scrape will feel smoother. To test this out, try it on a shower screen.
Low e glass: Comfort plus, solar e Marcus Mariota Jersey , solect etc… An oxide coat is attached to laminated glass. This means that the inside will scratch (or mark but I will get to that) just looking at it. The outside can be scraped! A dead giveaway is the drag test. Run your finger on one side and then check the other. Alternatively, wet one side up and run a squeegee on it. You will see the difference straight away. This is great because if you scrape the outside first, you can see what is on the inside which makes things slightly easier as you can’t use much on it. Internally no scrapers. steel wool etc can be used as anything metallic will mark the coating. Acetone or glue off (from rapid clean) is fantastic for water based paint, and glue residue. Paint stripper can be used edges where gloss paint has been slopped on to great effect and most importantly http://www.titansauthenticshop.com/ , without damaging the glass. This type of glass gets black scratches on it if blades etc are used. These can be removed using Hydrochloric. Low e has a bad rap and can be cleaned quite easily. Despite manufacturers claims, you can use a squeegee… Always be on your toes as sometimes glaziers will glaze these back to front. If you are concerned about being able to tell the difference, there is a tool that you buy that runs a current through the glass. It will light up red when you attach it to the conductive, or low e side of the glass.
Ichiro Suzuki hit an opposite field single on Friday night Antwon Blake Titans Jersey , giving him 4,191 professional hits between his career in Japan and Major League Baseball. That ties him with Hall of Famer Ty Cobb.
|