adtozhou
Posts 22
|
The laser printer is also known as a "page" printer, which means that it can not print as soon as the dot matrix, inkjet printer of the data - the laser printer once the print to a page as the smallest unit, even if the content is only one or two lines it will still use a piece of paper, the manufacturers for the user to save paper, so the design has been improved - - samsung printer toner will first save the data stored in the machine's memory, and so enough to print out a page, this will not waste the paper.
But sometimes we hope that if the data is full of pages have to be printed out immediately to avoid doping other content, then we can achieve the following way: we can page through the panel to achieve the purpose of the page, but this method To the printer relative to the specific manufacturers and models can be explained, so that I can not elaborate here, can only tell you that you can do so, the specific method you can refer to the instructions for page operation; File with jump page characters to achieve the purpose, this is done so that each time to print the operation panel but also to jump the page, and jump page characters can not only be used for laser printers, and lattice jump page characters can be located in any position.
As with other printers, the laser printer will have a lot of dust and brother tn420 after a period of use. If the "pollutant" is too much to affect the normal use of the printer, and even cause a malfunction, so we have to To be cleaned regularly.
There are some precautions during the cleaning process: Before cleaning the printer, be sure to cut off the power supply to avoid human failure and personal safety accidents. The outside of the printer should be cleaned with the dry cloth as dry as possible, and only with pure water or tap water. You can not use ammonia cleaning agent, the other because the printer is more afraid of the tide inside, so clean the inside of the printer must use a smooth dry cloth to wipe the dust and debris, of course, if too much dust, you can First with a small soft brush to remove and then rubbed cloth.
This article come from: http://v4toner.skyrock.com/3301275704-How-to-output-data-less-than-one-page-directly.html
|