|
1/17/2019 9:16:59 PM
|
|
JF bimetal bushings,flanged bimetal bearing Factor
|
Principle of self-lubricating bearings
Most of the Casting bimetal bushing used in the former machinery industry are still balls, needles and the like. Only a small part of the bearings have been self-lubricating bearings. It is believed that in the near future, the bearings will be incomparably strong, wear-resistant and economical. Advantages and become the leading product in the JF bimetal bushings,flanged bimetal bearing,plate strip industry. The following are the application characteristics and advantages of some self-lubricating bearings: oil-free lubrication bearing series
1. No oil lubrication or less oil lubrication. It is suitable for places that cannot be refueled or difficult to refuel. It can be used without maintenance or less maintenance.
2. Good wear resistance, small friction coefficient and long service life.
3. There is an appropriate amount of elastoplasticity, which can distribute the stress on the wider contact surface and improve the bearing capacity of the bearing.
4. The static friction coefficient is similar, which can eliminate the creep at low speed, thus ensuring the working precision of the machine.
5. It can reduce vibration, reduce noise, prevent pollution and improve working conditions.
6. DX Maginal Bushing The transfer film can be formed during the operation to protect the grinding shaft without biting.
|
|
1/17/2019 9:28:48 PM
|
|
Metallic Self-Lubricating Bushings Plain Bearings
|
There are the following differences between Metallic Self-Lubricating Bushings Plain Bearings Wrapped Bronze Series
,plastic bearings and metal sliding bearings: 1. The plastic bearings are all lubricated and have a long service life; while the metal sliding bearing lubrication layer is only 0.003mm PTFE on the surface, when this thin layer is rubbed. Expiration of the end of service life; 2, plastic bearings will not rust and corrosion, and metal bearings can not be used in chemical liquids; 3, plastic bearings are lighter than metal, which is more suitable for modernization Lightweight design trend; 4,GEC radial spherical plain bearing, plastic bearing manufacturing cost is lower than metal; plastic bearing is injection molding processing is more suitable for mass production; 5, plastic bearing does not have any noise during operation, has a certain vibration absorption function Because plastic bearings have many advantages over metal sliding bearings, the output of plastic bearings is expanding, and the use of DU Oilless Washer,plastic bearings is constantly expanding. From plastic equipment to office equipment and the automotive industry, plastic bearings are used. Cars driving on the road do not use plastic bearings. The market prospect of plastic bearings is infinitely broad!
|
|
1/17/2019 9:34:43 PM
|
|
Custom spherical bronze bearing,graphite lubricant
|
Sliding friction occurs when the Metric Wrapped Bronze CuSn8 Bearings,sliding bearing works; the magnitude of the rolling friction mainly depends on the manufacturing precision; and the frictional force of the sliding bearing mainly depends on the material of the sliding surface of the bearing. The DU Oilless Bushing sliding bearing generally has a self-lubricating function on the working surface; the sliding bearing is divided into a non-metallic sliding bearing and a metal sliding bearing according to the material. Non-metallic sliding bearings are mainly made of plastic bearings. Plastic bearings are generally made of engineering plastics with better performance. More professional manufacturers generally have self-lubricating technology for engineering plastics, through fibers, special lubricants, glass beads. The engineering plastics are self-lubricating and modified to achieve a certain performance, and then processed into a spherical bronze bearing,graphite lubricant bearing,self lubricating bearing, self-lubricating plastic bearing by injection molding with modified plastic.
|
|
1/17/2019 9:37:13 PM
|
|
Slide bearings Rolled bronze cylindrical bearing C
|
Application of Slide bearings Rolled bronze cylindrical bearing in construction machinery
Type of construction machinery:
1 lifting equipment such as tower cranes, self-propelled cranes, mast cranes, grab cranes, etc.
2 Excavation machinery such as single bucket excavator, multi bucket excavator, rolling excavator, milling excavator, tunnel boring machine (including shield ditch machinery).
3 shovels transport machinery such as bulldozers, scraper loaders, graders, transporters, flatbeds and dump trucks.
4 compaction machinery such as tire roller, smooth roller, single-foot roller, vibratory roller, compactor, tamping machine, etc.
6 reinforced concrete machinery such as concrete mixers, concrete mixing plants, concrete mixing plants, concrete pumps, concrete mixer trucks, concrete jets, concrete vibrators, steel processing machinery, etc.
7 Pile machinery such as drilling machines, diesel pile drivers, vibratory pile drivers, pile drivers, etc.
8 rock drilling machines such as rock drilling rigs, pneumatic rock drills, electric rock drills, internal combustion rock drills and downhole rock drills.
9 Other construction machinery such as bridge machines, pneumatic tools (air tools).
Due to the GE ES spherical plain bearing,heavy bearing capacity, poor environment and large loss of engineering machinery, it is difficult to replace the bearing parts. Therefore, the sliding bearing (inlaid solid self-lubricating bearing referred to as JDB) is a very good choice. He has both a Marine Bronze bushing SL4,metal bearing feature and a self-sliding bearing featuring a novel lubricated bearing that is loaded by a metal substrate and a specially formulated solid lubricant for lubrication. It has the characteristics of high bearing capacity, impact resistance, high temperature resistance and strong self-lubricating ability. It is especially suitable for heavy load, low speed, reciprocating or swinging, etc., which is difficult to lubricate and form oil film. It is also not afraid of water and other acid etching. And scouring. The majority of users generally reflect that the inlaid bearing is not only fuel-efficient, energy-saving, but also has a longer working life than ordinary sliding bearings. At present, the products have been widely used in metallurgical continuous casting machines, rolling equipment, mining machinery, ships, steam turbines, hydraulic turbines, injection molding machines and other large construction machinery.
|
|
1/17/2019 9:40:16 PM
|
|
Custom oil sintered bearing,oilite bearing China F
|
Oil-free bearing applications and basic performance requirements
Wrapped Bronze plain flanged cylindrical bushings,SF-2 Boundary Lubrication Bearing: Acidic polymethyl aldehyde, oil-free bearing has high wear resistance. The bearing surface has a regular arrangement. The oil storage pit must be coated with grease when it is assembled. It is especially suitable for high load. Rotating motion at low speed, rocking motion, and often under load, opening and closing, which is not easy to form fluid lubrication. Under boundary lubrication conditions, it can be used for a long time without oiling and maintenance, and the life of oil sintered bearing,oilite bearing can be improved by adding oil during the process. More extensions, currently applicable to metallurgical machinery, mining machinery, hydraulic machinery, auto parts, construction machinery, agricultural machinery and so on. Oil-free self-lubricating bearing,GEBK spherical plain radial bearing: This product is made of steel plate as the base, the middle layer is sintered with spherical bronze powder, and the surface layer is rolled with a mixture of polytetrafluoroethylene [ptfe] and lead. It has the characteristics of small friction coefficient, wear resistance and corrosion resistance, oil-free self-lubrication and long service life. It can reduce cost, reduce noise and prevent sticking and slipping.
|
|
1/17/2019 9:42:35 PM
|
|
FU flanged oil retaining bronze bushing manufactur
|
It is widely used in various mechanical SELF-LUBRICATED MAINTENANCE-FREE DRY BEARINGS PLAIN BUSHES,sliding parts such as printing machines, textile machines, hydraulic pallet trucks, tobacco machines, medical machinery, fitness equipment, micro-motors, automobiles, motorcycles and so on. Spherical steel bearing,spherical shape sleeve bearing,Metal-based inlaid solid self-lubricating bearing: It is a novel lubricated bearing that combines the characteristics of metal bearing and the characteristics of self-lubricating bearing. The metal matrix bears the load, and the specially formulated solid lubricating material acts as a lubrication. FU flanged oil retaining bronze bushing has the characteristics of high bearing capacity, impact resistance, high temperature resistance and strong self-lubricating ability.
|
|
1/17/2019 9:44:54 PM
|
|
Square flange sintered bronze bushing,square bushi
|
Traditional Self-lubricated MU Self-lubricating under dry operation BUSHES,oil-impregnated bearings: Due to the advantages of low hum and self-lubrication, oil-impregnated bearings have become the new darling of computer CPU fan bearings, and the market demand is large. In addition, as people's requirements for voices are getting higher and higher, oil-impregnated bearings,Square flange sintered bronze bushing,square bushing,volume control damper bushing are The application of everyday household appliances is also expanding. The basic requirements of the bearing for the material depend to a large extent on the performance of the bearing. Choosing the right material for the rolling bearing will have a major impact on its performance and longevity. In general, the main form of failure of rolling bearings is fatigue spalling under alternating stress and loss of bearing accuracy due to frictional wear. In addition, there are cracks, indentations, rust and other causes of abnormal damage to the bearing. Therefore, SGLX L shaped blank type oilless slide guide bushing rolling bearing should have high resistance to plastic deformation, less friction and wear, good rotation accuracy, good dimensional accuracy and stability, and long contact fatigue life. And many of these properties are determined by the combination of materials and heat treatment processes.
|
|
1/17/2019 9:47:16 PM
|
|
SGLXS L oilless bushing,SGLXS L shaped slide guide
|
Solid self-lubricating bearings for grinding parts
Solid self-lubricating bearings,DU oilless dry bush mainly include JDB-1, SF-1, FB09G, and other series of bearings, which are gradually transferred to the pits on the working surface of the grinding piece by the wear-and-wear self-lubricating material in the initial stage of work; Its friction and wear performance mainly depends on the performance of solid lubricants. The self-lubricating bearing working surface materials are usually made of copper alloy, aluminum alloy--bimetal, babbitt, etc., polytetrafluoroethylene PTFE, modified polyoxymethylene, rubber, Molybdenum disulfide, black lead and the like.
The utility model can separate the moving auxiliary surface after forming a solid lubricating film on the surface of SGLXS L oilless bushing,SGLXS L shaped slide guide,oilless slide plate pad solid self-lubricating bearing, the sliding friction force can be greatly reduced, and the shaft wear is also avoided. The flying solid self-lubricating bearing and the shaft have sliding friction, and the shaft transmits torque and motion during the operation. Therefore, the hardness and strength of the shaft material are required to be high. The JDB-1 self-lubricating bearing generally adopts a metal-on-grinding part. The hardness is above HRC 40°; the SF-1 is required to be lower, and the general 45# steel can also be used. The friction and wear performance mainly depends on the performance of the solid lubricant. The solid self-lubricating bearing Outer Square bronze bushing has large bearing capacity and high rotation precision, and the solid lubricating film has anti-impact effect.
|
|
1/17/2019 9:49:51 PM
|
|
DU oilless dry bushing Wrapped composite dry slidi
|
The solid lubricating film is a solid self-lubricating bearing,Wrapped composite dry sliding bearing working surface material which has good self-lubricating property, and gradually moves to a hard lubricating film formed by the wear-and-wear self-lubricating material in the initial stage of work to the pit on the working surface of the grinding piece; This has certain requirements on the roughness of the working surface of the grinding part, generally required to be between Ra 0.4 and 1.6; too smooth or too rough surface is not conducive to the transfer of lubricant to the working surface, hindering the construction of the lubricating film; For solid-lubricated bearings,FU iron bushing-powder sintered the general requirement is to grind the surface to the polished surface; when the solid lubricating film is completely formed, the movement between the shaft and the bearing has actually been transformed into the frictional movement between the lubricating film and DU oilless dry bushing, and the shaft is actually not directly In contact with the bearing surface.
|
|
1
|